Cold Finger Condensers / Condensers - Mega Sale! Save up to 23%


Mega Sale! Up to 23% off on Cold Finger Condensers (in Condensers) at Periodic Table on the Web [97]. Top brands include ACE Glass, LABOY, Chemglass, & VI STAR. Hurry! Limited time offers. Offers valid only while supplies last.



ACE GLASS 5958-99 Series Condenser with Cold Finger, 14 mm OD, 625 mm Jacket Length
By ACE Glass
In Stock
$127.48

mpn: 5958-99,

4.9 out of 5 stars with 39 reviews
Jacket Length is measured from the lower shoulder of the bulb to the bottom of the finger. Diameter of tube is 14mm. Used in 6472 pilot plant reactor.14Mm od. 625Mm jacket length. Sold in each.


Laboy HMC010406 Glass Cold Finger Condenser 250 mm Length Below Joint with 24/40 Joints
By LABOY
In Stock
$27.99

mpn: HMC010406,

4.4 out of 5 stars with 12 reviews
Liquid circulating through to keep the condenser cold. Used in sublimation apparatus. With 8 glass hose connections to accommodate 6mm I.D Rubber tubing for water in and out. With 24/40 inner joint, the Length of the part below joint is 250mm. Laboy glass are all made of high-quality borosilicate glass and made by hand-blowing to ensure uniform wall thickness.Cold finger condenser. 250Mm in length below Joint14/20. With 24/40Joints. Made of borosilicate glass. Made by hand blowing.


ACE GLASS 5960-12 Series Allihn Condenser with Cold Finger, Hose Barb for 3/8" Tubing, Length Below Joint 215 mm, 24/40 Joint
By ACE Glass
In Stock
$101.43

mpn: 5960-12,

4.8 out of 5 stars with 36 reviews
Cold Finger accessory for standard Allihn type condensers. This cold finger has a 24/40 inner joint that fits inside the condenser's upper outer joint and tube to provide added cooling ability and faster condensation. Fits into 5943, 5945, and 5946 condensers. Has two upper, glass, size D hose connections that take 3/8-inch tubing.Hose barb for 3/8 inch. Length below joint 215Mm. 24/40 joint.


ACE GLASS 5960-08 Series Allihn Condenser with Cold Finger, Hose Barb for 3/8" Tubing, Length Below Joint 110 mm, 24/40 Joint
By ACE Glass
In Stock
$107.71

mpn: 5960-08,

4.4 out of 5 stars with 39 reviews
Cold Finger accessory for standard Allihn type condensers. This cold finger has a 24/40 inner joint that fits inside the condenser's upper outer joint and tube to provide added cooling ability and faster condensation. Fits into 5943, 5945, and 5946 condensers. Has two upper, glass, size D hose connections that take 3/8-inch tubing.Hose barb for 3/8 inch. Length below joint 110Mm. 24/40 joint.


ACE GLASS 9250-02 Cold Finger Condenser for Distillation Head and System, 14/10 Joint Size
By ACE Glass
In Stock
$88.00

mpn: 9250-02,

4.9 out of 5 stars with 43 reviews
Cold finger accessory for standard distilling heads and systems. This cold finger has an inner joint that fits inside the upper outer joint and tube to provide added cooling ability and faster condensation. Fits into 6606, 6609, and 6613 distillation heads. Has two upper, glass, size a hose connections that take 5/16-inch tubing.Length below joint 80Mm. 14/10 joint. Hose barbs for 5/16In tubing.


ACE GLASS 9250-04 Cold Finger Condenser for Distillation Head and System, 14/20 Joint Size
By ACE Glass
In Stock
$91.00

mpn: 9250-04,

4.2 out of 5 stars with 41 reviews
Cold finger accessory for standard distilling heads and systems. This cold finger has an inner joint that fits inside the upper outer joint and tube to provide added cooling ability and faster condensation. Fits into 6606, 6609, and 6613 distillation heads. Has two upper, glass, size a hose connections that take 5/16-inch tubing.Length below joint 92Mm. 14/20 joint. Hose barbs for 5/16In tubing.


Chemglass CG-1222-04 Series CG-1222 Cold Finger Condenser, 29/42 Inner Joint, 200 mm Length Below Joint
By Chemglass
In Stock
$84.08

mpn: CG-1222-04,

4.4 out of 5 stars with 58 reviews
Condenser has an inner joint and a sealed lower drip tip for drop control. Hose connections have an O.D. of 10mm at the middle serration.29/42 Inner Joint. 200mm Length Below Joint. Condenser has an inner joint.


ACE GLASS 9250-08 Cold Finger Condenser for Distillation Head and System, 19/22 Joint Size
By ACE Glass
In Stock
$87.09

mpn: 9250-08,

4.6 out of 5 stars with 33 reviews
Cold finger accessory for standard distilling heads and systems. This cold finger has an inner joint that fits inside the upper outer joint and tube to provide added cooling ability and faster condensation. Fits into 6606, 6609, and 6613 distillation heads. Has two upper, glass, size a hose connections that take 5/16-inch tubing.Length below joint 92Mm. 19/22 joint. Hose barbs for 5/16In tubing.


Chemglass CG-1222-01 Series CG-1222 Cold Finger Condenser, 24/40 Inner Joint, 150 mm Length Below Joint
By Chemglass
In Stock
$74.60
$71.00
You Save: 5%

mpn: CG-1222-01,

4.2 out of 5 stars with 57 reviews
Condenser has an inner joint and a sealed lower drip tip for drop control. Hose connections have an O.D. of 10mm at the middle serration.24/40 Inner Joint. 150mm Length Below Joint. Condenser has an inner joint.


Laboy HMC010404 Glass Cold Finger Condenser 200 mm Length Below Joint with 24/40 Joints
By LABOY
In Stock
$25.53

mpn: HMC010404,

4.3 out of 5 stars with 17 reviews
Liquid circulating through to keep the condenser cold. Used in sublimation apparatus. With 8 glass hose connections to accommodate 6mm I.D Rubber tubing for water in and out. With 24/40 inner joint, the Length of the part below joint is 200mm. Laboy glass are all made of high-quality borosilicate glass and made by hand-blowing to ensure uniform wall thickness.Cold finger condenser. 200Mm in length below Joint14/20. With 24/40Joints. Made of borosilicate glass. Made by hand blowing.


Chemglass CG-1222-14 Series CG-1222 Cold Finger Condenser, 14/20 Inner Joint, 100 mm Length Below Joint
By Chemglass
In Stock
$66.42

mpn: CG-1222-14,

4.7 out of 5 stars with 30 reviews
Condenser has an inner joint and a sealed lower drip tip for drop control. Hose connections have an O.D. of 10mm at the middle serration.14/20 Inner Joint. 100mm Length Below Joint. Condenser has an inner joint.


Chemglass CG-1222-A-02 Series CG-1222-A Micro Cold Finger Condenser, 14/20 Inner Joint, 13 mm Length Below Joint
By Chemglass
In Stock
$131.49

mpn: CG-1222-A-02,

4.2 out of 5 stars with 36 reviews
Condenser for use in refluxing from 1 to 20mL of solvent in flasks having a capacity of 5 to 50mL. Minimal surface area provides for better yields while providing adequate cooling. The additional hose connection is provided to allow introduction of an inert gas such as nitrogen. Top hose connection is cooling inlet and middle hose connection is cooling outlet. Cold finger extends either 5mm or 13mm below the joint and is used on a flask with the listed joint size. Hose connection is 10mm at the


Laboy HMC010416 Glass Cold Finger Condenser 250 mm Length Below Joint 24/40 with Removable Hose Connections
By LABOY
In Stock
$28.81

mpn: HMC010416,

4.1 out of 5 stars with 11 reviews
Liquid circulating through to keep the condenser cold. Used in sublimation apparatus. With removable hose connections. With 24/40 inner joint, the Length of the part below joint is 250mm. Laboy glass are all made of high-quality borosilicate glass and made by hand-blowing to ensure uniform wall thickness.Cold finger condenser. 250Mm in length below Joint14/20. With 24/40Joints. With removable hose connections. Made by hand blowing.


Laboy Glass Cold Finger Condenser 100mm In Length Below 19/22 Joint organic Chemistry Condenser
By LABOY
In Stock
$20.23

mpn: HMC010402,

4.2 out of 5 stars with 10 reviews
Liquid circulating through to keep the condenser cold. Used in Sublimation apparatus. with 8 glass hose connections to accommodate 6mm I.D.rubber tubing for water in and out. with 19/22 inner joint,the length of the part below joint is 100mm. Laboy glass are all made of high-quality borosilicate glass and made by hand-blowing to ensure uniform wall thickness.Cold finger condenser. 100mm in length below 19/22 joint. with 19/22 joints. Made of borosilicate glass3.3. Made by hand-blowing.


Laboy HMC010411 Glass Cold Finger Condenser 100 mm Length Below Joint 14/20 with Removable Hose Connections
By LABOY
In Stock
$20.57

mpn: HMC010411,

4.0 out of 5 stars with 42 reviews
Liquid circulating through to keep the condenser cold. Used in sublimation apparatus. With removable hose connections. With 14/20 inner joint, the Length of the part below joint is 100mm. Laboy glass are all made of high-quality borosilicate glass and made by hand-blowing to ensure uniform wall thickness.Cold finger condenser. 100Mm in length below Joint14/20. With 14/20Joints. With removable hose connections. Made by hand blowing.


Laboy HMC010412 Glass Cold Finger Condenser 100 mm Length Below 19/22 Joint and Removable Hose Connections
By LABOY
In Stock
$22.45

mpn: HMC010412,

4.0 out of 5 stars with 15 reviews
Liquid circulating through to keep the condenser cold. Used in sublimation apparatus. With removable hose connections. With 19/22 inner joint, the Length of the part below joint is 100mm. Laboy glass are all made of high-quality borosilicate glass and made by hand-blowing to ensure uniform wall thickness.Cold finger condenser. 100Mm in length below 19/22 joint. With removable hose connections. Made of borosilicate Glass3.3. Made by hand-blowing.


Laboy HMC010414 Glass Cold Finger Condenser 200 mm Length Below Joint 24/40 with Removable Hose Connections
By LABOY
In Stock
$34.78
$26.75
You Save: 23%

mpn: HMC010414,

4.7 out of 5 stars with 21 reviews
Liquid circulating through to keep the condenser cold. Used in sublimation apparatus. With removable hose connections. With 24/40 inner joint, the Length of the part below joint is 200mm. Laboy glass are all made of high-quality borosilicate glass and made by hand-blowing to ensure uniform wall thickness.Cold finger condenser. 200Mm in length below Joint14/20. With 24/40Joints. With removable hose connections. Made by hand blowing.


Chemglass CG-1222-A-01 Series CG-1222-A Micro Cold Finger Condenser, 14/20 Inner Joint, 5 mm Length Below Joint
By Chemglass
In Stock
$131.49

mpn: CG-1222-A-01,

4.7 out of 5 stars with 19 reviews
Condenser for use in refluxing from 1 to 20mL of solvent in flasks having a capacity of 5 to 50mL. Minimal surface area provides for better yields while providing adequate cooling. The additional hose connection is provided to allow introduction of an inert gas such as nitrogen. Top hose connection is cooling inlet and middle hose connection is cooling outlet. Cold finger extends either 5mm or 13mm below the joint and is used on a flask with the listed joint size. Hose connection is 10mm at the


Laboy HMC010401 Glass Cold Finger Condenser 100 mm Length Below Joint with 14/20 Joints
By LABOY
In Stock
$18.93

mpn: HMC010401,

4.2 out of 5 stars with 52 reviews
Liquid circulating through to keep the condenser cold. Used in sublimation apparatus. With 8 glass hose connections to accommodate 6mm I.D Rubber tubing for water in and out. With 14/20 inner joint, the Length of the part below joint is 100mm. Laboy glass are all made of high-quality borosilicate glass and made by hand-blowing to ensure uniform wall thickness.Cold finger condenser. 100Mm in length below Joint14/20. With 14/20Joints. Made of borosilicate glass. Made by hand blowing.


14kw Round 6-Prong High and Heavy with Peg 1.50ct. Setting
By VI STAR
In Stock
$84.24

mpn: GO-WG150-94Z,

4.2 out of 5 stars with 25 reviews
White Gold 14k with Round 6-Prong High and Heavy with Peg 1.50ct. Setting. Model Number: WG150-9. Feature Highlights. Quality: White-gold. Primary Metal composition: Gold. Spectacularly Designed. Flawless Finish. Got questions about this item? If you wish to know any additional info or have any additional questions regarding this item, please don't hesitate to send us an email. We will answer any questions in a timely manner. Thank you. Please be sure to include the ASIN number of the product yo



Viewing Page 1 of 2



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - periodictableontheweb.com. All Rights Reserved.