Lab Beaker Clamps / Supports & Apparatus - Extreame Savings! Save up to 48%


Extreame Savings! Up to 48% off on Lab Beaker Clamps (in Supports & Apparatus) at Periodic Table on the Web [172]. Top brands include TOPINCN, HFS, PUL FACTORY, Goldleaf Scientific, stonylab, Soccerene, MALAB, BIPEE, Carolina Biological Supply Company, Flameer, Adamas-Beta, USA Lab Equipment, & Senderpick. Hurry! Limited time offers. Offers valid only while supplies last.



TOPINCN Lab Clamp 3 Prong Finger Style Clip Adjustable Swivel Extension Flask Clamp Lab Test Tube Condenser Lab Holder
By TOPINCN
In Stock
$16.49
$14.49
You Save: 12%

mpn: TOPINCN60mwgku3ai, ean: 0783335372874,

4.1 out of 5 stars with 33 reviews
Features: 100% brand new and high quality. Made of durable metal material, the clamp has long service life. The adjustable clamp base can be easily fixed on a edge of desk. Plastic covered prongs would not leave any scratches on objects Widely used for holding flasks, test tubes and so on in lab. Specifications: Material: Metal Length: 22cm/8.7in Weight: 212g(approx.) Package Includes: 1 x Clamp✪ 100% brand new and high quality.. ✪ Made of durable metal material, the clamp has long service


HFS(R) Burette Clamp (Butterfly Clip) for All Titration Experiments Below 100ml
By HFS
In Stock
$11.99

mpn: DIS-BT-CLAMP,

4.9 out of 5 stars with 34 reviews
If the acid (or base) flows to the test bench, rinse immediately with a suitable amount of sodium bicarbonate solution (or dilute acetic acid), then rinse with water and dry with a cloth.If only a small amount of acid or alkali solution drops onto the test bench, immediately wipe it with a wet cloth, and then rinse the cloth with water.Suitable for acid-base titration experiment. Burette clip is made of aluminum alloy. Length 9.8inch, width 4.7inch.. This burette clamp has high strength alloy ja


PUL FACTORY Lab Clamp with Boss Head, Two Round Jaws, Up to 58mm In Dia.
By PUL FACTORY
In Stock
$10.29

mpn: ASINPPOKAL55250, ean: 0708191709275,

4.6 out of 5 stars with 36 reviews
PUL Factory Lab Burette / Test tube Clamp with Boss Head Material: Die-Cast Alloy (Zinc-Alloy) Jaws: 2 Round JawOpening Range: Up to 58mm Used for beaker clamp, test tube clamp, burette clamp, condenser tube clamp.Ideal Tool for laboratory. Holds Irregular Shapes Easily. 2 round jaw lab clamp with boss head. Large grip adjustment range. Made of Zinc-alloy.


Goldleaf Scientific ACC034PK #34 Plastic Keck Clips (5-Pack)
By Goldleaf Scientific
In Stock
$11.19

mpn: ACC034PK, ean: 7426911877778,

4.3 out of 5 stars with 55 reviews
Keck clips, or sometimes called keck clamps, are perfect for securing your glassware joints and avoiding costly breakage as a result of joints coming apart. They are non-corrosive, will not scratch your glassware and can be used up to 140°C. Keck Clips are color coded and have molded-in size markings.34mm. Qty. 5.


StonyLab Spherical Pinch Clamp, Stainless Steel Spherical Joint Clamp Holder with Screw Type Locking Nut for Laboratory, Size 35
By stonylab
In Stock
$19.99

mpn: SphericalPinchClamp-35, ean: 0843798112087,

4.8 out of 5 stars with 40 reviews
Why Choose StonyLab? 1. The StonyLab means high-quality products for reasonable prices. 2. We boast excellent customer service with a high satisfaction rating, with our team of representatives ready to assist you Monday to Friday, from 9:30AM to 5:30PM Eastern Time. 3. We pack and ship your orders directly from our US-based warehouse within 24 business hours, and tracking information will be provided to you as soon as it's available. Description Available in Size 12, Size 18, Size 28, and Size


Soccerene Lab Stand Clamp Holder Boss Head Aluminium Alloy Body Right Angle for Rods up to 18mm in Dia. Pack of 4
By Soccerene
In Stock
$12.99

mpn: xmsl0002-1, ean: 0611714631604,

4.0 out of 5 stars with 10 reviews
Description:*A clamp holder is used for holding a clamp in medical labs and research institutes.*Package includes 4pcs clamp holder with aluminium alloy body and right angle clips*For rods up to 16mm in dia.*The body is made of aluminium alloy, part with a screw for attaching a clamp onto the stand's rod. Aluminum is light, please don't think the body is plastic just because it's light.*Excellent laboratory iron clip, an usual clamp accessory in the lab, also suitable for home use.*We also have


MALAB Lab Spring Stainless Steel Test Tube Clamp Stoddard Tongs 5 Pcs
By MALAB
In Stock
$25.99
$13.58
You Save: 48%

mpn: MALAB813, ean: 0747880588005,

4.3 out of 5 stars with 50 reviews
MALAB Lab Spring Stainless Steel Test Tube Clamp Stoddard Tongs 5 PcsCondition: 100% Brand New and High Quality Material: Stainless Steel Length: 26cmWeight: 110 gHold Beakers 0-30ml Package Content: 5 x Test Tube ClampUse to Hold Test Tube.High Quality: Made of Stainless Steel.. Hold Test Tube from 0 to 30mm.. Spring Action Self-closing Rectangular Jaws. Length: 26cm. CE.


BIPEE Lab Clamp Retort, 3 Finger, Rubber Coated Prong Jaws
By BIPEE
In Stock
$12.99

mpn: Clamp3J, ean: 0708191706878,

4.8 out of 5 stars with 11 reviews
3 prong dual adjust extension clamp. Rubber coatedIdeal Tool for laboratory. Holds Irregular Shapes Easily. 3 prong dual adjust extension clamp. Large grip adjustment range.


PUL FACTORY Extension Lab Clamp, 3 PVC Coated Finger, Zinc-Alloy, Single Adjust 0-70mm
By PUL FACTORY
In Stock
$11.29

mpn: PUL51001, ean: 0708191709220,

4.0 out of 5 stars with 35 reviews
PUL Factory 3-Prongs Single adjust Extension Lab Clamp Material: Die-Cast Alloy (Zinc-Alloy) Jaws: 3 PVC CoatedOpening Range: 0 -70mmOverlength: 150mm Used for beaker clamp, test tube clamp, burette clamp, condenser tube clamp.Ideal Tool for laboratory. Holds Irregular Shapes Easily. 3 PVC Coated jaws adjust extension clamp. Large grip adjustment range. Made of Zinc-alloy.


Double Buret Clamp
By Carolina Biological Supply Company
In Stock
$15.40

mpn: 707341,

4.8 out of 5 stars with 32 reviews
Strong die-cast clamp holds 2 burets at once. Spring-loaded handles hold burets securely. Rubber-covered grips prevent scratches. Accommodates rods up to 1/2'' diam.Strong die-cast clamp holds 2 burets at once. Spring-loaded handles hold burets securely. Rubber-covered grips prevent scratches. Accommodates rods up to 1/2'' diam.. The Carolina Pledge: 100% Satisfaction Guaranteed. All of our products are unconditionally guaranteed. If for any reason you are not satisfied with any item, you may re


Flameer 5pcs Plastic Joint Clip National Standard Joint Clamps Glass Keck Clamp 34mm Used to Prevent a Joint from Separating During Reaction
By Flameer
In Stock
$10.84

mpn: f6a47e34ae6188ffa7826487709a673c, ean: 0717993996929,

4.1 out of 5 stars with 25 reviews
Description: - Made of polyacetal, and are colored according to joint sizes - Used to prevent a joint from separating during a reaction process - To secure the two sides together and are available for different temperature and chemical environments - Will not scratch glassware or corrode; withstands temperatures up to 120 °C, cannot use with corrosive gas - Care needs to be taken that clips made from plastic are not being used to hold glass together that will GET THIS HOTSpecification: - Joint


BIPEE Lab Swivel Type Clamp Condenser 3 Finger, with Boss Head, Up to 90mm
By BIPEE
In Stock
$14.29

mpn: Clamp3JS, ean: 0708191705833,

4.8 out of 5 stars with 26 reviews
Rubber Coated 3 Prong Lab clamp Chrome Plated Covered jaws for protection and grip 360 degree adjust ,grip 5-90mm. 21cm Overlength With Boss Headjaws with Zinc alloy surface. 5~90mm opening. Holds test tubes or burettes. 360 degree rotation. 3 Fingers with Boss Head.


Adamas-Beta Electroplate 3 Finger Adjustment Lab Clamp Retort Prong Jaw Style Rubber-Wrapped Jaws Head with Adjustable Screw Base, Alloy Steel
By Adamas-Beta
In Stock
$10.99

mpn: 02043653, ean: 8492552183065,

4.5 out of 5 stars with 30 reviews
Specifications Pack:1 Materiel:alloy steel Characteristics Made of high quality alloy steel, which has advantages of high temperature resistant,low temperature resistant,stable material performance The surface is plated to prevent chemical corrosion and durability Rubber-Wrapped jaws will safely protect your glassware from scratching bad The jaw opening is flexible and can be used to hold laboratory instruments of different specification The four prong clamp is made of high quality stainless ste


#24 Metal Keck Clamp For 24/40 & 24/29 Ground Joints - Lot of 5
By USA Lab Equipment
In Stock
$13.95

mpn: N46,

4.5 out of 5 stars with 35 reviews
New Our Metal Keck Clamps are constructed with Stainless Steel for a durable, cost effective clamp.   Joint Fit: 24/40 24/29 SKU: N46   For Technical Support, Questions, or Other Issues Please Email or Call Us!   USA Lab Equipment 11730 Globe Street Livonia, MI 48150   -


BIPEE Labs Burette/Test Tube Clamp, Opens up to 55mm in Dia
By BIPEE
In Stock
$10.99

mpn: Clamp2JS, ean: 0708191722984,

4.6 out of 5 stars with 60 reviews
Round clamp steel jaws which open from 16mm to 55mm. The clamp attaches to rods up to 16mm in diameter. 185mm long. Lab clamp for burette, flask, beakerjaws with Zinc alloy surface. 16mm to 55mm opening. Holds test tubes or burettes. Rods up to 16mm in diameter.


Goldleaf Scientific ACC040PK #40 Plastic Keck Clips (5-Pack)
By Goldleaf Scientific
In Stock
$12.99

mpn: ACC040PK, ean: 7426911877785,

4.3 out of 5 stars with 35 reviews
Keck clips, or sometimes called keck clamps, are perfect for securing your glassware joints and avoiding costly breakage as a result of joints coming apart. They are non-corrosive, will not scratch your glassware and can be used up to 140°C. Keck Clips are color coded and have molded-in size markings.40mm. Qty. 5.


Laboratory Support Stand Pole Flask Condenser Lab Clamp Clips Set Holder 60cm (60cm)
By Senderpick
In Stock
$35.99

mpn: Does Not Apply,

4.6 out of 5 stars with 44 reviews
Features -For Laboratory using -For holding flask, condenser pipe, etc. -Standard set of laboratory stands, for your convenient experience Specifications Material: iron Size :135*210*600mm Color: silver + black Package included 1 x Laboratory support 9 x Laboratory clips★ Standard set of laboratory stands, for your convenient experience. ★ The iron stand for fixing and supporting a variety of instruments, often used in filtration or heating. ★ For Laboratory using, for holding flask,


StonyLab 2-Pack Adjustable Bosshead Clamp Holder, Lab Heavy Duty Boss Head Clamp Holder Aluminum Alloy Body, up to 21mm Rods for Laboratory Use
By stonylab
In Stock
$11.99

mpn: BossHeadClamp, ean: 0843798108417,

4.0 out of 5 stars with 17 reviews
Why Choose StonyLab? 1. The StonyLab means high-quality products for reasonable prices. 2. We boast excellent customer service with a high satisfaction rating, with our team of representatives ready to assist you Monday to Friday, from 9:30AM to 5:30PM Eastern Time. 3. We pack and ship your orders directly from our US-based warehouse within 24 business hours, and tracking information will be provided to you as soon as it's available. Description 2-pack adjustable boss head clamp holders. Made


Adamas-Beta Three Prongs Extension Flask Clip Clamp, Two Adjustable Clip Three-Prong Swivel Flask Clamp with Screw Base, Spray Coating Blue, Large Size
By Adamas-Beta
In Stock
$15.19

mpn: 02043655, ean: 8492552183096,

4.1 out of 5 stars with 38 reviews
Specifications Pack:1 Materiel:alloy steel Characteristics Made of high quality alloy steel,which has the advantages of good heat resistance,high mechanical strength,good durability,not easy to aging,not easy to be damaged The surface spray coating to prevent chemical corrosion and durability The plastic covered prongs would not leave any scratches on objects,offers you a better using experience The jaw opening is flexible and can be used to hold laboratory instruments of different specification


Adamas-Beta Aluminum Burette Clip Titration Clamp Laboratory Experiment Fixing Accessories
By Adamas-Beta
In Stock
$11.19

mpn: 02043639, ean: 8492552182785,

4.8 out of 5 stars with 16 reviews
Specifications Pack:1 Material:aluminum/plastic Characteristics Made of high quality material, sturdy and durable in use The left and right tongs of the burette clamp should have sufficient elastic force The burette clamp is suitable for fixing burette on laboratory titration table The burette holder is acid and alkali resistant, with light weight and convenient to use Laboratory burette clip is a good laboratory assistant, and very practical, perfect for school, laboratoryThe burette clip adopt



Viewing Page 1 of 2



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - periodictableontheweb.com. All Rights Reserved.